ip nat
ip dhcp relay
ip dhcp server
location-info
mesh
neighbor-list
mesh-id ssk-mesh
neighbor-list-type inactive
router awr
debug error
router multicast
debug state
disable
router ospf
debug none
disable
service auto-orphan-recovery
disable
service avt
mode disabled
service ntp
disable
service recovery
debug-level error
enable
service rf-management
debug process
service roaming-motrix
debug-level dump
disable
service vplm
allowed-vlan auto
enable
country-code JP
hostname MSR-1
interface dot11radio 0
antenna-type third-party-directional
channel-list a 120
channel-list bg 1,6,11
cts-protection disable
txpower 10
wds auto
wireless-mode ng
interface dot11radio 1
channel-list a 184,192
cts-protection disable
short-gi
txpower 12
wds auto
wireless-mode na-ht40plus
interface gigabit-ethernet 0
mode none
switchport access vlan 1
interface loopback 0
ip address from-mac
router-id
interface vlan 1
ip address 10.215.200.150/24
management
mtu 1500
ip route 0.0.0.0/0 10.215.200.1
local-ip 192.168.216.2/24
mesh installation outdoor
public-safety
snmp-server syscontact support@arubanetworks.com
snmp-server syslocation BeiJing
pse-mode off
snmp-server community public ro
snmp-server community private rw
snmp-server trap open client_online
snmp-server trap open client_offline
!
--------------------------------------------------------------------------------
MSR-1#
clear Clear debug information
client-list show client list
clock Set system time
configure Configuration from vty interface
debug Show running system information
disable Turn off privileged mode command
end End current mode and change to enable mode.
exit Exit current mode and down to previous mode
help Description of the interactive help system
list Print command list
orphan-reboot Orphan reboot
orphan-recovery Orphan recovery
ping Send echo messages
quit Exit current mode and down to previous mode
reboot Reboot system
remote-capture Remote capture
restart-radio Restart radio
router-test Router test command
router-user Change password for a CLI user
save Save log to remote server
setup Setup the router
show Show running system information
ssh Open an ssh connection
telnet Open a telnet connection
traceroute Trace route to destination
upgrade Upgrade system software
write Write running configuration to file
--------------------------------------------------------------------------------
MSR-1# show
ap-list Ap list
arp Displays all ARP entries of the device
auto-orphan-recovery show history of the box if recovered itself
avt AVT
camera show cameras
channel-list Channel list
client Client
client-list client-list
clock Current time
data-path Show data path
debug Show service debug information
dhcp DHCP (Dynamic Host Configuration Protocol)
hardware Hardware information
hostname This system's network name(32 chars limited)
interface Interface information
inventory Device inventory information
ip IP information
log Show log
mesh Mesh information
multicast-optimization Multicast enhance(M2U)
ntp NTP service configuration
nvd NVD
pse PSE controller
rf-management Radio frequency management
roaming-motrix Configure motrix service
router-id Show router-id
running-config Running configuration
startup-config Contents of startup configuration
tech-support Technical support information
version Displays image version
vlan VLAN information
vplm vplm information
--------------------------------------------------------------------------------
MSR-1# show ip route
Codes: K - kernel route, C - connected, S - static, H - host, O - OSPF,
A - AWR, d - DHCP, > - selected route, * - FIB route
S>* 0.0.0.0/0 [1/0] via 10.215.200.1, vlan 1
C>* 10.44.108.238/32 is directly connected, loopback 0
A>* 10.44.109.3/32 [50/2] via 22.54.119.46, dot11radio 1/wds 0, 4d23h26m
A>* 10.45.207.135/32 [50/2] via 22.54.119.50, dot11radio 1/wds 1, 4d23h11m
C>* 10.215.200.0/24 is directly connected, vlan 1
C>* 22.54.119.44/30 is directly connected, dot11radio 1/wds 0
C>* 22.54.119.48/30 is directly connected, dot11radio 1/wds 1
A>* 22.231.195.128/30 [50/2] via 22.54.119.50, dot11radio 1/wds 1, 4d23h11m
C>* 192.168.216.0/24 is directly connected, local
--------------------------------------------------------------------------------
MSR-2# show interface brief
Interface Name Admin Status Physical Status IP Type IP Address
gigabit-ethernet 0 up down none
loopback 0 up up from-mac 10.44.109.3/32
vlan 1 up up dhcp 10.215.200.62/24
dot11radio 0/wds 7 up up static 22.231.195.130/30
dot11radio 0/wds 8 up up static 22.54.119.46/30
local up up static 192.168.216.1/24
--------------------------------------------------------------------------------MSR-2# show interface brief
Interface Name Admin Status Physical Status IP Type IP Address
gigabit-ethernet 0 up down none
loopback 0 up up from-mac 10.44.109.3/32
vlan 1 up up dhcp 10.215.200.62/24
dot11radio 0/wds 7 up up static 22.231.195.130/30
dot11radio 0/wds 8 up up static 22.54.119.46/30
local up up static 192.168.216.1/24
show rf-management
--------------------------------------------------------------------------------
MSR-1# show rf-management
candidates Candidate routers
links Backhaul links
neighbors Neighbor routers
portals Portals information
MSR-1# show rf-management neighbors
Column name abbreviation
R - Radio index
C - Mesh Links Available
Q - Whether a neighbor is qualified
Reasons flag abbreviation
S - Signal lower than limit;
M - Mode not backhaul;
I - Mesh ID mismatch;
A - Authentication type mismatch;
C - Denied by my channel-list;
N - Denied by my neighbor-list;
Total neighbors: 2
Radio 1 neighbors:
RadioMAC Hostname R MeshID AuthType C Mode Chan RSSI Inactive Q(Reasons)
00:17:7b:2c:6d:04 MSR-2 0 ssk-mesh Open 2 na40+ 192 43 0:0:0 Y
00:17:7b:2d:cf:88 MSR-3 0 ssk-mesh Open 2 na40+ 192 56 0:0:0 Y
MSR-1# show rf-management
candidates Candidate routers
links Backhaul links
neighbors Neighbor routers
portals Portals information
MSR-1# show rf-management candidates
Column name abbreviation
R - Radio index
C - Mesh Links Available
Total candidates: 2
Radio 1 candidates:
RadioMAC Hostname R MeshID AuthType C Mode Chan RSSI Inactive State Reason
00:17:7b:2c:6d:04 MSR-2 0 ssk-mesh Open 2 na-ht40plus 192 44 0:0:0 Linked
00:17:7b:2d:cf:88 MSR-3 0 ssk-mesh Open 2 na-ht40plus 192 55 0:0:0 Linked
MSR-1# show rf-management links
<cr>
| Pipe the result to a filter
MSR-1# show rf-management links
Radio 1 Wireless mode:na-ht40plus, Wireless channel:192
Link 0: Peer hostname: MSR-2,
Peer radio index: 0, Peer MAC: 00:17:7b:2c:6d:04,
Local role: ap, Local interface name: dot11radio 1/wds 0,
Local IP: 22.54.119.45, Peer IP: 22.54.119.46,
Link state: physical up, Physical up time: 4d23h,
Link quality: 69%, Data rate: 270M, RSSI: 36, SNR: 36,
Input rate: 28.08 Kbps, Output rate: 1.30 Kbps.
Link 1: Peer hostname: MSR-3,
Peer radio index: 0, Peer MAC: 00:17:7b:2d:cf:88,
Local role: ap, Local interface name: dot11radio 1/wds 1,
Local IP: 22.54.119.49, Peer IP: 22.54.119.50,
Link state: physical up, Physical up time: 4d23h,
Link quality: 82%, Data rate: 300M, RSSI: 53, SNR: 53,
Input rate: 27.44 Kbps, Output rate: 1.26 Kbps.
Total number of link is 2
MSR-1# show rf-management
candidates Candidate routers
links Backhaul links
neighbors Neighbor routers
portals Portals information
MSR-1# show rf-management portals
Total have 0 portal(s)
MSR-1#
--------------------------------------------------------------------------------
show mesh
--------------------------------------------------------------------------------
MSR-1# show mesh
candidates Candidate routers
channel-information mesh channel list information
links Backhaul links
neighbors Neighbor routers
node-list Show mesh node list
paths Path to each router
portals Portals information
route HostName router table
MSR-1# show mesh portals
Total have 0 portal(s)
MSR-1# show mesh poths
% Unknown command.
MSR-1# show mesh
candidates Candidate routers
channel-information mesh channel list information
links Backhaul links
neighbors Neighbor routers
node-list Show mesh node list
paths Path to each router
portals Portals information
route HostName router table
MSR-1# show mesh paths
Path to MSR-2: [Local] =36,70%=> MSR-2
Path to MSR-3: [Local] =54,80%=> MSR-3
MSR-1# show mesh candidates
Column name abbreviation
R - Radio index
C - Mesh Links Available
Total candidates: 2
Radio 1 candidates:
RadioMAC Hostname R MeshID AuthType C Mode Chan RSSI Inactive State Reason
00:17:7b:2c:6d:04 MSR-2 0 ssk-mesh Open 2 na-ht40plus 192 44 0:0:0 Linked
00:17:7b:2d:cf:88 MSR-3 0 ssk-mesh Open 2 na-ht40plus 192 55 0:0:0 Linked
MSR-1# show mesh channel-information
Column name abbreviation
NF: channel's noise floor;
UTIL: channel's total utilization;
WIFI: channel's WIFI utilization;
INTF: channel's interference utilization;
INTF-L: interference level, for detection and avoidance;
NGH-CNT: channel's backhaul neighbor count/connecting to me;
ADJ-UTIL: channel's adjusted utility, for channel selecting;
FLAGS: channel flags;
A - Allowed channel;
D - DFS channel;
W - Weather radar channel;
R - Radar detected;
I - Heavy interference channel;
O - Overlap with other radio;
C - Candidate channel;
Radio 0 channel list:
Channel NF UTIL WIFI INTF INTF-L NGH-CNT ADJ-UTIL FLAGS
1 -96 12% 10% 2% 2 0/0 2% AC
2 - - - - - 0/0 - C
3 - - - - - 0/0 - C
4 - - - - - 0/0 - C
5 - - - - - 0/0 - C
6 -96 15% 11% 4% 4 0/0 9% AC
7 - - - - - 0/0 - C
8 - - - - - 0/0 - C
9 - - - - - 0/0 - C
10 - - - - - 0/0 - C
11 -96 29% 24% 5% 5 0/0 17% AC
12 - - - - - 0/0 - C
13 - - - - - 0/0 - C
Radio 1 channel list:
Channel NF UTIL WIFI INTF INTF-L NGH-CNT ADJ-UTIL FLAGS
184 -92 1% 1% 0% 0 0/0 0% AC
192 -92 1% 1% 0% 0 2/2 0% AC
100 - - - - - 0/0 - DC
108 - - - - - 0/0 - DC
116 - - - - - 0/0 - DC
124 - - - - - 0/0 - DC
132 - - - - - 0/0 - DC
MSR-1# show mesh links
Radio 1 Wireless mode:na-ht40plus, Wireless channel:192
InterfaceName PeerMAC PeerHostName PeerRadio State Time LinkQuality DataRate RSSI SNR InputRate OutputRate
dot11radio 1/wds 0 00:17:7b:2c:6d:04 MSR-2 0 up 4d23h 70% 270M 37 37 30.44 Kbps 1.26 Kbps
dot11radio 1/wds 1 00:17:7b:2d:cf:88 MSR-3 0 up 4d23h 83% 300M 52 52 30.18 Kbps 1.26 Kbps
Total number of link is 2
MSR-1# show mesh neighbors
Column name abbreviation
R - Radio index
C - Mesh Links Available
Q - Whether a neighbor is qualified
Reasons flag abbreviation
S - Signal lower than limit;
M - Mode not backhaul;
I - Mesh ID mismatch;
A - Authentication type mismatch;
C - Denied by my channel-list;
N - Denied by my neighbor-list;
Total neighbors: 2
Radio 1 neighbors:
RadioMAC Hostname R MeshID AuthType C Mode Chan RSSI Inactive Q(Reasons)
00:17:7b:2c:6d:04 MSR-2 0 ssk-mesh Open 2 na40+ 192 43 0:0:0 Y
00:17:7b:2d:cf:88 MSR-3 0 ssk-mesh Open 2 na40+ 192 54 0:0:0 Y
MSR-1# show mesh node-list
# DeviceMAC HostName GW ManagementIP
1 00:17:7b:2c:6c:ee MSR-1 No 10.215.200.150
2 00:17:7b:2c:6d:03 MSR-2 No 10.215.200.62
3 00:17:7b:2d:cf:87 MSR-3 No 10.215.200.64
MSR-1# show mesh paths
Path to MSR-2: [Local] =36,70%=> MSR-2
Path to MSR-3: [Local] =53,82%=> MSR-3
MSR-1# show mesh portals
Total have 0 portal(s)
MSR-1# show mesh route
local HostName -> MSR-1
MSR-2 is directly connected, dot11radio 1/wds 0, 4d23h32m
MSR-3 is directly connected, dot11radio 1/wds 1, 4d23h18m
0 件のコメント:
コメントを投稿