IAP: IAP's apboot command

• Standalone AP
• setenv standalone_mode 
• 
  
• 
  

IAP's AP boot command　or AP Reboot command
(7210-1) #apboot ?
all                     Reboot all APs
ap-group                Reboot APs in this group
ap-name                 Reboot AP with this name
ip-addr                 Reboot AP at this IP address
ip6-addr                Reboot AP at this IPv6 address
wired-mac               Reboot AP at this MAC address

---------------------------------------------

apboot> printenv

bootdelay=2

baudrate=9600

autoload=n

boardname=Talisker

servername=aruba-master

bootcmd=boot ap

autostart=yes

bootfile=mips32.ari

ethaddr=00:0b:86:cf:95:94

ethact=eth0

standalone_mode=1

name=AP-1

os_partition=1

ipaddr=10.215.1.240

netmask=255.255.255.0

gatewayip=10.215.1.254

dnsip=10.215.1.1

domainname=arubanetworks.co.jp

wifi1_arm_channel=1

wifi1_arm_power=0

wifi0_arm_channel=36

wifi0_arm_power=0

type followings at "apboot> ".

apboot> set ipaddr 10.215.1.240

apboot> set netmask 255.255.255.0

apboot> set gatewayip 10.215.1.254

apboot> set dnsip 10.215.1.1

apboot> set domainname arubanetworks.co.jp
apboot> set standalone_mode 1
----------------------
apboot's Convert-setting

clear os 0

setenv os_partition 0

setenv master <コントローラIP>

setenv serverip<コントローラIP>

save

IAP 起動後は
convert-aos-ap cap <コントローラIP>

RAPの場合はremote_apが必要

os_partition=0

master=153.150.107.193

remote_ap=1

---------------

IAP's CLI
convert-aos-ap cap

convert-aos-ap RAP 153.150.107.195